|
Product Details:
|
| Display: | 320 X 240 Pixels,8"TFT 800*600 PIX,3.5 TFT LCD,3.5-inch TFT Display,3.5" TFT-LCD | ||
|---|---|---|---|
| High Light: | 0.5 °/Hr solid state gyroscope,Single Axis boat gyroscope,Fiber Optic mems gyroscope |
||
Model XB120/F50 High Accury Single-axis Fiber Optic Gyroscope With 0.5 °/hr Bias Drift
F50 type fiber optic gyroscope is a uniaxial low precision military grade fiber optic gyroscope produced by Institute of
Photoelectric Technology, Beijing University of Aeronautics and Astronautics.
Main performance indicators
| Bias Drift at full temperature range from －40℃ till 60℃ |
＜0.5°/hr(1σ ) | 2H continuous test,10s smooth result |
| Bias Drift Repeatability at full temperature range from －40℃ till 60℃ |
＜0.5°/hr(1σ ) | Calculation results of six test data |
| Random Walk | ＜0.05°/√hr | |
| Scale Factor Non-linearity at full temperature range from －40℃ till 60℃ |
＜200ppm(1σ ) | |
| Scale Factor Repeatability at full temperature range from －40℃ till 60℃ |
＜200ppm( 1σ) | Calculation results of three test data |
| Range of measured angular rate | ±500°/s | It can be adjusted according to need |
| Bandwidth | ≥200Hz | The internal closed-loop bandwidth is larger than 2K,and the updata rate of output data determines the bandwidth of gyroscope |
| Operating temperature | －40℃ ~60℃ | |
| Storage temperature | －50℃ ~70℃ | |
| Vibration | 4.2g,20Hz~1000Hz | Sweep-frequency Vibration without Resonance |
Definition of mechanical interface
Dimensions and Weights of Fiber Optic Gyroscopes
| Outline size | 50mm×50mm×35mm |
| Weight | ≤120g |
| Mounting hole spacing | 41mm×41mm |
| Mounting screws | φ3.4 |
| Installation Surface Accuracy |
Flatness 0.01mm |
Power requirements
XB120/F50 fiber optic gyroscope is powered by +5V DC power supply.
Power Supply Requirements for Fiber Optic Gyroscopes
| ＋5V power supply | 5W | The maximum impulse current is closed to2A |
| －5V power supply | 3W | |
| Power precision | ±5% | |
| Power ripple | 20mV | Vpp |
| Gyroscope power consumption at room temperature |
＜2W | |
| Full temperature Power Consumption of Gyroscope |
＜5W | －40℃ ~60℃ |
Interface Definition and Communication Protocol
The external interface of gyroscope adopts lead-out mode. The specification of lead-out line AF-250A-7*0.12, single point and single line, length not less than 150 mm, lead definition is distinguished by color.
Wiring table
| Electrical characteristics |
Lead color | Lead specification |
| T＋ | green | AF-250A-7×0.12 |
| T－ | violet | AF-250A-7×0.12 |
| －5V | yellow | AF-250A-7×0.12 |
| GND | black | AF-250A-7×0.12 |
| ＋5V | gules | AF-250A-7×0.12 |
Contact Person: Yu.Jing
Tel: +8613045000776
